Mapa pamięci Atari 16/32bit
From Atariki
.---------------------------------------------------. |Atari ST/STe/MSTe/TT/F030 Hardware Register Listing| `---------------------------------------------------'
Address Description Space
+----------------------------------------------------------------+-----
- CPU Reset Vectors ######
+----------------------------------------------------------------+-----
$000000|Reset : Initial SSP |SP $000004|Reset : Initial PC |SP
+----------------------------------------------------------------+-----
- CPU Exception Vectors ######
+----------------------------------------------------------------+-----
$000008|Bus Error |SD $00000C|Address Error |SD $000010|Illegal Instruction |SD $000014|Zero Divide |SD $000018|CHK, CHK2 Instruction |SD $00001C|cpTRAPcc, TRAPcc, TRAPV |SD $000020|Privilege Violation |SD $000024|Trace |SD $000028|Line 1010 Emulator (LineA) |SD $00002C|Line 1111 Emulator (LineF) |SD $000030|(Unassigned, Reserved) |SD $000034|Coprocessor Protocol Violation (68030) |SD $000038|Format Error (68010) |SD $00003C|Uninitialized Interrupt Vector |SD $000040|(Unassigned, Reserved) |SD
: | : : | :
$00005F|(Unassigned, Reserved) |SD $000060|Spurious Interrupt (Bus error during interrupt) |SD
+----------------------------------------------------------------+-----
- Auto-Vector Interrupts ######
+----------------------------------------------------------------+-----
$000064|Level 1 Int Autovector (TT VME) |SD $000068|Level 2 Int Autovector (HBL) |SD $00006C|Level 3 Int Autovector (TT VME) |SD $000070|Level 4 Int Autovector (VBL) |SD $000074|Level 5 Int Autovector |SD $000078|Level 6 Int Autovector (MFP) |SD $00007C|Level 7 Int Autovector |SD
+----------------------------------------------------------------+-----
- Trap Instruction Vectors (Trap #n = Vector number + 32 + n) ######
+----------------------------------------------------------------+-----
$000080|Trap #0 |SD $000084|Trap #1 (GemDOS) |SD $000088|Trap #2 (AES/VDI) |SD $00008C|Trap #3 |SD $000090|Trap #4 |SD $000094|Trap #5 |SD $000098|Trap #6 |SD $00009C|Trap #7 |SD $0000A0|Trap #8 |SD $0000A4|Trap #9 |SD $0000A8|Trap #10 |SD $0000AC|Trap #11 |SD $0000B0|Trap #12 | $0000B4|Trap #13 (BIOS) |SD $0000B8|Trap #14 (XBIOS) |SD
+----------------------------------------------------------------+-----
- Math Coprocessor Vectors (68881/68882/Internal) ######
+----------------------------------------------------------------+-----
$0000C0|FFCP Branch or Set on Unordered Condition |SD $0000C4|FFCP Inexact Result |SD $0000C8|FFCP Divide by Zero |SD $0000CC|FFCP Underflow |SD $0000D0|FFCP Operand Error |SD $0000D4|FFCP Overflow |SD $0000D8|FFCP Signaling NAN |SD $0000DC|(Unassigned, Reserved) |SD
+----------------------------------------------------------------+-----
- PMMU Coprocessor Vectors (68851/Internal) ######
+----------------------------------------------------------------+-----
$0000E0|MMU Configuration Error |SD $0000E4|MC68851, not used by MC68030 |SD $0000E8|MC68851, not used by MC68030 |SD
+----------------------------------------------------------------+-----
- Miscellaneous Vectors ######
+----------------------------------------------------------------+-----
$0000EC|(Unassigned, Reserved) |SD
: | : : | :
$0000FF|(Unassigned, Reserved) |SD
+----------------------------------------------------------------+-----
- User Assigned Interrupt Vectors ######
+----------------------------------------------------------------+-----
$000100|ST-MFP-0 - Centronics busy |SD $000104|ST-MFP-1 - RS-232 DCD |SD $000108|ST-MFP-2 - RS-232 CTS |SD $00010C|ST-MFP-3 - Blitter done |SD $000110|ST-MFP-4 - Timer D (USART timer) |SD $000114|ST-MFP-5 - Timer C (200hz Clock) |SD $000118|ST-MFP-6 - Keyboard/MIDI (ACIA) |SD $00011C|ST-MFP-7 - FDC/HDC |SD $000120|ST-MFP-8 - Timer B (HBL) |SD $000124|ST-MFP-9 - Send Error |SD $000128|ST-MFP-10 - Send buffer empty |SD $00012C|ST-MFP-11 - Receive error |SD $000130|ST-MFP-12 - Receive buffer full |SD $000134|ST-MFP-13 - Timer A (STe sound) |SD $000138|ST-MFP-14 - RS-232 Ring detect |SD $00013C|ST-MFP-15 - GPI7 - Monochrome Detect |SD $000140|TT-MFP-0 - GPI 0 |SD $000144|TT-MFP-1 - GPI 1 |SD $000148|TT-MFP-2 - SCC-DMA Controller |SD $00014C|TT-MFP-3 - Ring Indicator SCC B |SD $000150|TT-MFP-4 - Timer D |SD $000154|TT-MFP-5 - Timer C |SD $000158|TT-MFP-6 - (Reserved) GPI 4 |SD $00015C|TT-MFP-7 - SCSI DMA Controller |SD $000160|TT-MFP-8 - Timer B |SD $000164|TT-MFP-9 - Send Error |SD $000168|TT-MFP-10 - Send buffer empty |SD $00016C|TT-MFP-11 - Receive error |SD $000170|TT-MFP-12 - Receive buffer full |SD $000174|TT-MFP-13 - Timer A |SD $000176|TT-MFP-14 - TT Clock (MC146818A) |SD $00017C|TT-MFP-15 - TT-SCSI Drive Controller NCR 5380 |SD $000180|SCC Interrupt |SD $0001BC|SCC Interrupt |SD $0001C0|User Defined, Unused |SD
: | : : : | :
$0003FC|User Defined, Unused |SD
+----------------------------------------------------------------+-----
Address Size Description Name
+-----+-----------------------------------------------------+----------
- System Crash Page ###########
+-----+-----------------------------------------------------+----------
$000380|long |Validates System Crash Page if $12345678 |proc_lives $000384|.....|Saved registers D0-D7 |proc_dregs $0003A4|.....|Saved registers A0-A7 |proc_aregs $0003C4|long |Vector number of crash exception |proc_enum $0003C8|long |Saved USP |proc_usp $0003CC|.....|Saved 16 words from exception stack |proc_stk
+-----+-----------------------------------------------------+----------
- System Variables ###########
+-----+-----------------------------------------------------+----------
$000400|long |GEM Event timer vector |etv_timer $000404|long |GEM Critical error handler |etv_critic $000408|long |GEM Program termination vector |etv_term $00040C|long |GEM Additional vector #1 (Unused) |etv_xtra
: | : | : : : : : | :
$00041C|long |GEM Additional vector #5 (Unused) |etv_xtra $000420|long |Validates memory configuration if $752019F3 |memvalid $000424|word |Copy of contents of $FF8001 |memctrl $000426|long |Validates resvector if $31415926 |resvalid $00042A|long |Reset vector |resvector $00042E|long |Physical top of RAM |phystop $000432|long |Start of TPA (user memory) |_membot $000436|long |End of TPA (user memory) |_memtop $00043A|long |Validates memcntrl and memconf if $237698AA |memval2 $00043E|word |If nonzero, floppy disk VBL routine is disabled |flock $000440|word |Floppy Seek rate - 0:6ms, 1:12ms, 2:2ms, 3:3ms |seekrate $000442|word |Time between two timer calls (in milliseconds) |_timer_ms $000444|word |If not zero, verify floppy disk writes |_fverify $000446|word |Default boot device |_bootdev $000448|word |0 - NTSC (60hz), <>0 - PAL (50hz) |palmode $00044A|word |Default video resolution |defshiftmod $00044C|word |Copy of contents of $FF8260 |sshiftmod $00044E|long |Pointer to video RAM (logical screen base) |_v_bas_ad $000452|word |If not zero, VBL routine is not executed |vblsem $000454|word |Number of vertical blank routines |nvbls $000456|long |Pointer to list of vertical blank routines |_vblqueue $00045A|long |If not zero, points to color palette to be loaded |colorptr $00045E|long |If not zero, points to video ram for next VBL |screenpt $000462|long |Counter for number of VBLs |_vbclock $000466|long |Number of VBL routines executed |_frclock $00046A|long |Vector for hard disk initialization |hdv_init $00046E|long |Vector for resolution change |swv_vec $000472|long |Vector for getbpb for hard disk |hdv_bpb $000476|long |Vector for read/write routine for hard disk |hdv_rw $00047A|long |Vector for hard disk boot |hdv_boot $00047E|long |Vector for hard disk media change |hdv_mediach $000482|word |If not zero, attempt to load "COMMAND.PRG" on boot |_comload $000484|byte |Attribute vector for console output BIT 3 2 1 0|conterm
| |Return "kbshift" for BIOS conin --------------' | | ||
| |System bell (1 - on) ---------------------------' | ||
| |Key repeat (1 - on) ------------------------------' ||
| |Key click (1 - on) ---------------------------------'|
$000486|long |Return address for TRAP #14 (unused)|trp14ret $00048A|long |Return address for critical error handler (unused)|criticret $00048E|long |Memory descriptor block |themd $00049E|long |Space for additional memory descriptors |themdmd $0004A2|long |Pointer to BIOS save registers block |savptr $0004A6|word |Number of connected floppy drives |_nflops $0004A8|long |Vector for screen output |con_state $0004AC|word |Temporary storage for cursor line position |save_row $0004AE|long |Pointer to save area for exception processing |sav_context $0004B2|long |Pointer to buffer control block for GEMDOS data |_bufl $0004B6|long |Pointer to buffer control block for GEMDOS fat/dir |_bufl $0004BA|long |Counter for 200hz system clock |_hz_200 $0004BC|long |Pointer to default environment string |the_env $0004C2|long |Bit allocation for physical drives (bit 0=A, 1=B..) |_drvbits $0004C6|long |Pointer to 1024-byte disk buffer |_dskbufp $0004CA|long |Pointer to autoexecute path |_autopath $0004CE|long |Pointer to VBL routine #1 |_vbl_lis
: | : | : : : : : | :
$0004EA|long |Pointer to VBL routine #8 |_vbl_lis $0004EE|word |Flag for screen -> printer dump |_dumpflg $0004F0|word |Printer abort flag |_prtabt $0004F2|long |Pointer to start of OS |_sysbase $0004F6|long |Global shell pointer |_shell_p $0004FA|long |Pointer to end of OS |end_os $0004FE|long |Pointer to entry point of OS |exec_os $000502|long |Pointer to screen dump routine |scr_dump $000506|long |Pointer to _lstostat() |prv_lsto $00050A|long |Pointer to _lstout() |prv_lst $00050E|long |Pointer to _auxostat() |prv_auxo $000512|long |Pointer to _auxout() |prv_aux $000516|long |If AHDI, pointer to pun_info |pun_ptr $00051A|long |If $5555AAAA, reset |memval3 $00051E|long |8 Pointers to input-status routines |xconstat $00053E|long |8 Pointers to input routines |xconin $00055E|long |8 Pointers to output-status routines |xcostat $00057E|long |8 Pointers to output routines |xconout $00059E|word |If not 0, then not 68000 - use long stack frames |_longframe $0005A0|long |Pointer to cookie jar |_p_cookies $0005A4|long |Pointer to end of FastRam |ramtop $0005A8|long |Validates ramtop if $1357BD13 |ramvalid $0005AC|long |Pointer to routine for system bell |bell_hook $0005B0|long |Pointer to routine for system keyclick |kcl_hook
+-----+-----------------------------------------------------+----------
Address Size Description Bits used Read/Write
+-----+-----------------------------------------------------+----------
- OS ROMs ###########
+-----+-----------------------------------------------------+----------
$E00000|byte |TOS 512k ROMs |R
: | : | : : : |:
$EFFFFF|byte |TOS 512k ROMs |R
+-----+-----------------------------------------------------+----------
- ADSPEED Configuration registers ###########
+-----+-----------------------------------------------------+----------
$F00000|byte |Switch to 16 Mhz |W $F10000|byte |Switch to 8 Mhz |W $F20000|byte |Turn on high speed ROM option in 16 Mhz |W $F30000|byte |Turn off high speed ROM option |W $F40000|byte |Unknown |W $F50000|byte |Turn off cache while in 16 Mhz |W
| | >> Write 0 to an address to set it. << |
+-----+-----------------------------------------------------+----------
- IDE Controller (Falcon, ST-Book, IDE cards) ###########
+-----+-----------------------------------------------------+----------
$F00000|word |Data Register |R/W
| | BIT 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0|
$F00002|word |Data Register |R/W ??
| | BIT 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0|
$F00005|byte |Error Register BIT 7 6 5 4 3 2 1 0|R
| |Bad block mark -----------------------' | | | | | | ||
| |Uncorrectable error --------------------' | | | | | ||
| |Media change -----------------------------' | | | | ||
| |ID-Field not found -------------------------' | | | ||
| |Media change requested -----------------------' | | ||
| |Command aborted --------------------------------' | ||
| |Track 0 not found --------------------------------' ||
| |DAM not found --------------------------------------'|
$F00005|byte |Parameter bergabe |W ?? $F00009|byte |Sector Count Register |W $F0000D|byte |Sector Number Register |W $F00011|byte |Cylinder Low Register BIT 7 6 5 4 3 2 1 0|W $F00015|byte |Cylinder High Register BIT 1 0|W $F00019|byte |Drive Head Register BIT 7 6 5 4 3 2 1 0|W
| |Sector size (512 bytes, fixed) -------+ + + | | | | ||
| |Drive (0 - Master, 1 - Slave) --------------' | | | ||
| |Head number ----------------------------------+ + + +|
$F0001D|byte |Status Register BIT 7 6 5 4 3 2 1 0|R
| |Drive busy with executing Command ----' | | | | | | ||
| |Drive Ready ----------------------------' | | | | | ||
| |Drive Write Fault ------------------------' | | | | ||
| |Drive Seek Complete ------------------------' | | | ||
| |Data Request ---------------------------------' | | ||
| |Corrected Data ---------------------------------' | ||
| |Index pulse --------------------------------------' ||
| |Error ----------------------------------------------'|
$F0001D|byte |Command Register |W $F00039|byte |Alternate Status Register |R
| |2nd status register, like 1st no deletion of the IRQ | |
$F00039|byte |Data Output Register BIT 2 1 .|W
| |Software Reset (1 - on)-------------------------+ | |
| |Interrupt after end of Command (0 - on) ----------+ |
$F0003D|byte |Active address BIT 6 5 4 3 2 1 0|R
| |Drive is writing (0 - on) --------------' | | | | | ||
| |Negated number of head number ------------+ + + + | ||
| |Slave Drive Select (0 - on) ----------------------' ||
| |Master Drive Select (0 - on) -----------------------'|
+-----+-----------------------------------------------------+----------
- ST MMU Controller ###########
+-----+-----------------------------------------------------+----------
$FF8001|byte |MMU memory configuration BIT 3 2 1 0|R/W
| |Bank 0 | | | ||
| |00 - 128k ------------------------------------+-+ | ||
| |01 - 512k ------------------------------------+-+ | ||
| |10 - 2m --------------------------------------+-+ | ||
| |11 - reserved --------------------------------+-' | ||
| |Bank 1 | ||
| |00 - 128k ----------------------------------------+-+|
| |01 - 512k ----------------------------------------+-+|
| |10 - 2m ------------------------------------------+-+|
| |11 - reserved ------------------------------------+-'|
+-----+-----------------------------------------------------+----------
- Falcon030 Processor Control ###########
+-----+-----------------------------------------------------+----------
$FF8007|byte |Falcon Bus Control BIT 5 . . 2 . 0|R/W (F030)
| |STe Bus Emulation (0 - on) ---------------' | ||
| |Blitter (0 - 8mhz, 1 - 16mhz) ------------------' ||
| |68030 (0 - 8mhz, 1 - 16mhz) ------------------------'|
+-----+-----------------------------------------------------+----------
- SHIFTER Video Controller ###########
+-----+-----------------------------------------------------+----------
$FF8201|byte |Video screen memory position (High byte) |R/W $FF8203|byte |Video screen memory position (Mid byte) |R/W $FF820D|byte |Video screen memory position (Low byte) |R/W (STe) $FF8205|byte |Video address pointer (High byte) |R $FF8207|byte |Video address pointer (Mid byte) |R $FF8209|byte |Video address pointer (Low byte) |R $FF820E|word |Offset to next line |R/W (F030) $FF820F|byte |Width of a scanline (width in words-1) |R/W (STe) $FF8210|word |Width of a scanline (width in words) |R/W (F030) $FF8265|byte |Horizontal scroll register (0-15) |R/W (STe)
+-----+-----------------------------------------------------+----------
$FF820A|byte |Video synchronization mode BIT 1 0|R/W
| |0 - 60hz, 1 - 50hz -------------------------------+ ||
| |0 - internal, 1 - external sync ------------------' || (TT)
| |0 - internal, 1 - external sync --------------------'| (!TT)
+-----+-----------------------------------------------------+----------
| | BIT 11111198 76543210|
| | 543210 |
| | ST color value .....RRr .GGr.BBb|
| | STe color value ....rRRR gGGGbBBB|
$FF8240|word |Video palette register 0 Lowercase = LSB|R/W
: | : | : : : : | :
$FF825E|word |Video palette register 15 |R/W
+-----+-----------------------------------------------------+----------
$FF8260|byte |Shifter resolution BIT 1 0|R/W
| |00 320x200x4 bitplanes (16 colors) ---------------+-+|
| |01 640x200x2 bitplanes (4 colors) ----------------+-+|
| |10 640x400x1 bitplane (1 colors) ----------------+-'|
$FF8262|word |TT Shifter resolution BIT 15 . . 12|R/W (TT)
| |Sample/Hold mode ----------------------------' ||
| |Hypermono mode -------------------------------------'|
| |Video Mode BIT 10 9 8|
| |000 320x200x4 bitplanes (16 colors) -----------+-+-+|
| |001 640x200x2 bitplanes (4 colors) ------------+-+-+|
| |010 640x400x1 bitplane (2 colors)(Duochrome) -+-+-+|
| |100 640x480x4 bitplanes (16 colors) -----------+-+-+|
| |110 1280x960x1 bitplane (2 colors) ------------+-+-+|
| |111 320x480x8 bitplanes (256 colors) ----------+-+-'|
| |ST Palette Bank BIT 3 2 1 0|
+-----+-----------------------------------------------------+----------
$FF827E|???? |STACY Display Driver |???(STACY)
+-----+-----------------------------------------------------+----------
| | BIT 11111198 76543210|
| | 543210 |
| | TT color value ....RRRr GGGgBBBb|
$FF8400|word |TT Palette 0 Lowercase = LSB|R/W (TT)
: | : | : : : | : :
$FF85FE|word |TT Palette 255 |R/W (TT)
+-----+-----------------------------------------------------+----------
- Falcon030 VIDEL Video Controller ###########
+-----+-----------------------------------------------------+----------
$FF8006|byte |Monitor Type BIT 1 0|R (F030)
| |00 - Monochrome (SM124) --------------------------+-+|
| |01 - Color (SC1224) ------------------------------+-+|
| |10 - VGA Color -----------------------------------+-+|
| |11 - Television ----------------------------------+-'|
$FF820E|word |Offset to next line |R/W (F030) $FF8210|word |VWRAP - Linewidth in words |R/W (F030) $FF8266|word |SPSHIFT BIT 10 . 8 . 6 5 4 3 2 1 0|R/W (F030)
| |2-colour mode ------------------' | | | | | | | ||
| |Truecolour mode --------------------' | | | | | | ||
| |Use external hsync ---------------------' | | | | | ||
| |Use external vsync -----------------------' | | | | ||
| |8 Bitplane mode ----------------------------' | | | ||
| |? Bitplane mode ------------------------------' | | ||
| |? Bitplane mode --------------------------------' | ||
| |? Bitplane mode ----------------------------------' ||
| |? Bitplane mode ------------------------------------'|
| +-----------------------------------------------------+
| | Horizontal Control Registers (9bit)|
$FF8280|word |HHC - Horizontal Hold Counter |R (F030) $FF8282|word |HHT - Horizontal Hold Timer |R/W (F030) $FF8284|word |HBB - Horizontal Border Begin |R/W (F030) $FF8286|word |HBE - Horizontal Border End |R/W (F030) $FF8288|word |HDB - Horizontal Display Begin |R/W (F030) $FF828A|word |HDE - Horizontal Display End |R/W (F030) $FF828C|word |HSS - Horizontal SS |R/W (F030) $FF828E|word |HFS - Horizontal FS |R/W (F030) $FF8290|word |HEE - Horizontal EE |R/W (F030)
| +-----------------------------------------------------+
| | Vertical Control Registers (10bit)|
$FF82A0|word |VFC - Vertcial Frequency Counter |R (F030) $FF82A2|word |VFT - Vertical Frequency Timer |R/W (F030) $FF82A4|word |VBB - Vertical Border Begin (count in 1/2 lines)|R/W (F030) $FF82A6|word |VBE - Vertical Border End (count in 1/2 lines)|R/W (F030) $FF82A8|word |VDB - Vertical Display Begin |R/W (F030) $FF82AA|word |VDE - Vertical Display End |R/W (F030) $FF82AC|word |VSS - Vertical SS |R/W (F030)
| +-----------------------------------------------------+
$FF82C0|word |??? - Video Clock (?) (Super78 puts $182 here) |R/W (F030) $FF82C2|word |VCO - Video Control BIT 3 2 1 0|R/W (F030)
| |Quarter pixel width (quadruple pixels) -------' | | ||
| |Half pixel width (double pixels) ---------------' | ||
| |Skip line (interlace) ----------------------------' ||
| |Line doubling --------------------------------------'|
+-----+-----------------------------------------------------+----------
- DMA/WD1772 Disk controller ###########
+-----+-----------------------------------------------------+----------
$FF8600| |Reserved | $FF8602| |Reserved | $FF8604|word |FDC access/sector count |R/W $FF8606|word |DMA mode/status BIT 2 1 0|R
| |Condition of FDC DATA REQUEST signal -----------' | ||
| |0 - sector count null,1 - not null ---------------' ||
| |0 - no error, 1 - DMA error ------------------------'|
$FF8606|word |DMA mode/status BIT 8 7 6 . 4 3 2 1 .|W
| |0 - read FDC/HDC,1 - write ---------' | | | | | | | |
| |0 - HDC access,1 - FDC access --------' | | | | | | |
| |0 - DMA on,1 - no DMA ------------------' | | | | | |
| |Reserved ---------------------------------' | | | | |
| |0 - FDC reg,1 - sector count reg -----------' | | | |
| |0 - FDC access,1 - HDC access ----------------' | | |
| |0 - pin A1 low, 1 - pin A1 high ----------------' | |
| |0 - pin A0 low, 1 - pin A0 high ------------------' |
$FF8609|byte |DMA base and counter (High byte) |R/W $FF860B|byte |DMA base and counter (Mid byte) |R/W $FF860D|byte |DMA base and counter (Low byte) |R/W
+-----+-----------------------------------------------------+----------
- TT-SCSI DMA Controller ###########
+-----+-----------------------------------------------------+----------
$FF8701|byte |DMA Address Pointer (Highest byte) |R/W (TT) $FF8703|byte |DMA Address Pointer (High byte) |R/W (TT) $FF8705|byte |DMA Address Pointer (Low byte) |R/W (TT) $FF8707|byte |DMA Address Pointer (Lowest byte) |R/W (TT) $FF8709|byte |DMA Byte Count (Highest byte) |R/W (TT) $FF870B|byte |DMA Byte Count (High byte) |R/W (TT) $FF870D|byte |DMA Byte Count (Low byte) |R/W (TT) $FF870F|byte |DMA Byte Count (Lowest byte) |R/W (TT) $FF8710|word |Residue Data Register (High Word) |R (TT) $FF8712|word |Residue Data Register (Low Word) |R (TT) $FF8715|byte |Control register BIT 7 6 . . . . 1 0|R/W (TT)
| |Bus error ----------------------------' | | ||
| |Byte count zero ------------------------' | ||
| |Enable -------------------------------------------' ||
| |DMA Direction (1 - out to port) --------------------'|
+-----+-----------------------------------------------------+----------
- TT-SCSI Drive Controller NCR 5380 ###########
+-----+-----------------------------------------------------+----------
$FF8781|byte |Data register |R/W (TT) $FF8783|byte |Init-Command Register |R/W (TT) $FF8785|byte |Mode Register |R/W (TT) $FF8787|byte |Target-Command Register |R/W (TT) $FF8789|byte |ID Select/SCSI Control Register |R/W (TT) $FF878B|byte |Status Register |R/W (TT) $FF878D|byte |Target Receive/Input Data |R/W (TT) $FF878F|byte |Initiate Receive/Reset |R/W (TT)
+-----+-----------------------------------------------------+----------
- YM2149 Sound Chip ###########
+-----+-----------------------------------------------------+----------
$FF8800|byte |Read data/Register select |R/W
| |0 Channel A Freq Low BIT 7 6 5 4 3 2 1 0|
| |1 Channel A Freq High BIT 3 2 1 0|
| |2 Channel B Freq Low BIT 7 6 5 4 3 2 1 0|
| |3 Channel B Freq High BIT 3 2 1 0|
| |4 Channel C Freq Low BIT 7 6 5 4 3 2 1 0|
| |5 Channel C Freq High BIT 3 2 1 0|
| |6 Noise Freq BIT 5 4 3 2 1 0|
| |7 Mixer Control BIT 7 6 5 4 3 2 1 0|
| | Port B IN/OUT (1=Output) -----------' | | | | | | ||
| | Port A IN/OUT ------------------------' | | | | | ||
| | Channel C Noise (1=Off) ----------------' | | | | ||
| | Channel B Noise --------------------------' | | | ||
| | Channel A Noise ----------------------------' | | ||
| | Channel C Tone (0=On) ------------------------' | ||
| | Channel B Tone ---------------------------------' ||
| | Channel A Tone -----------------------------------'|
| |8 Channel A Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level (0=Fixed) -----------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |9 Channel B Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level ---------------------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |10 Channel C Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level ---------------------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |11 Envelope Period High BIT 7 6 5 4 3 2 1 0|
| |12 Envelope Period Low BIT 7 6 5 4 3 2 1 0|
| |13 Envelope Shape BIT 3 2 1 0|
| | Continue -----------------------------------' | | ||
| | Attack ---------------------------------------' | ||
| | Alternate --------------------------------------' ||
| | Hold ---------------------------------------------'|
| | 00xx - \____________________________________ |
| | 01xx - /|___________________________________ |
| | 1000 - \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\ |
| | 1001 - \____________________________________ |
| | 1010 - \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ |
| | 1011 - \|----------------------------------- |
| | 1100 - /|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/ |
| | 1101 - /------------------------------------ |
| | 1110 - /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ |
| | 1111 - /|___________________________________ |
| |14 Port A BIT 7 6 5 4 3 2 1 0|
| | IDE Drive On/OFF -------------------+ | | | | | | || (F030)
| | SCC A (0=LAN, 1=Serial2) -----------' | | | | | | || (TT)
| | Monitor jack GPO pin -----------------+ | | | | | ||
| | Internal Speaker On/Off --------------' | | | | | || (F030)
| | Centronics strobe ----------------------' | | | | ||
| | RS-232 DTR output ------------------------' | | | ||
| | RS-232 RTS output --------------------------' | | ||
| | Drive select 1 -------------------------------' | ||
| | Drive select 0 ---------------------------------' ||
| | Drive side select --------------------------------'|
| |15 Port B (Parallel port) |
$FF8802|byte |Write data |W
| +-----------------------------------------------------+
| |Note: PSG Registers are now fixed at these addresses.|
| |All other addresses are masked out on the Falcon. Any|
| |writes to the shadow registers $8804-$88FF will cause|
| |bus errors. Game/Demo coders beware! |
+-----+-----------------------------------------------------+----------
- DMA Sound System ###########
+-----+-----------------------------------------------------+----------
$FF8900|byte |Buffer interrupts BIT 3 2 1 0|R/W (F030)
| |TimerA-Int at end of record buffer -----------' | | ||
| |TimerA-Int at end of replay buffer -------------' | ||
| |MFP-15-Int (I7) at end of record buffer ----------' ||
| |MFP-15-Int (I7) at end of replay buffer ------------'|
+-----+-----------------------------------------------------+----------
$FF8901|byte |DMA Control Register BIT 7 . 5 4 . . 1 0|R/W
| |1 - select record register -----------+ | | | || (F030)
| |0 - select replay register -----------' | | | || (F030)
| |Loop record buffer -----------------------' | | || (F030)
| |DMA Record on ------------------------------' | || (F030)
| |Loop replay buffer -------------------------------' || (STe)
| |DMA Replay on --------------------------------------'| (STe)
+-----+-----------------------------------------------------+----------
$FF8903|byte |Frame start address (high byte) |R/W (STe) $FF8905|byte |Frame start address (mid byte) |R/W (STe) $FF8907|byte |Frame start address (low byte) |R/W (STe) $FF8909|byte |Frame address counter (high byte) |R (STe) $FF890B|byte |Frame address counter (mid byte) |R (STe) $FF890D|byte |Frame address counter (low byte) |R (STe) $FF890F|byte |Frame end address (high byte) |R/W (STe) $FF8911|byte |Frame end address (mid byte) |R/W (STe) $FF8913|byte |Frame end address (low byte) |R/W (STe)
+-----+-----------------------------------------------------+----------
$FF8920|byte |DMA Track Control BIT 5 4 . . 1 0|R/W (F030)
| |00 - Set DAC to Track 0 ------------------+-+ | ||
| |01 - Set DAC to Track 1 ------------------+-+ | ||
| |10 - Set DAC to Track 2 ------------------+-+ | ||
| |11 - Set DAC to Track 3 ------------------+-' | ||
| |00 - Play 1 Track --------------------------------+-+|
| |01 - Play 2 Tracks -------------------------------+-+|
| |10 - Play 3 Tracks -------------------------------+-+|
| |11 - Play 4 Tracks -------------------------------+-'|
+-----+-----------------------------------------------------+----------
$FF8921|byte |Sound mode control BIT 7 6 . . . . 1 0|R/W (STe)
| |0 - Stereo, 1 - Mono -----------------' | | ||
| |0 - 8bit -------------------------------+ | ||
| |1 - 16bit (F030 only) ------------------' | || (F030)
| |Frequency control bits | ||
| |00 - Off (F030 only) -----------------------------+-+| (F030)
| |00 - 6258hz frequency (STe only) -----------------+-+|
| |01 - 12517hz frequency ---------------------------+-+|
| |10 - 25033hz frequency ---------------------------+-+|
| |11 - 50066hz frequency ---------------------------+-'|
| |Samples are always signed. In stereo mode, data is |
| |arranged in pairs with high pair the left channel,low|
| |pair right channel. Sample length MUST be even in |
| |either mono or stereo mode. |
| |Example: 8 bit Stereo : LRLRLRLRLRLRLRLR |
| | 16 bit Stereo : LLRRLLRRLLRRLLRR (F030) |
| |2 track 16 bit stereo : LLRRllrrLLRRllrr (F030) |
+-----+-----------------------------------------------------+----------
- STe Microwire Controller (STe/TT only!) ###########
+-----+-----------------------------------------------------+----------
$FF8922|byte |Microwire data register |R/W (Mwr) $FF8924|byte |Microwire mask register |R/W (Mwr)
| +-----------------------------------------------------+
| |!! ATTENTION !! Microwire is now obsolete! It is not |
| |present in the Falcon030 and is unlikely to be in any|
| |future machines. You have been warned. |
| +-----------------------------------------------------+
| |Volume/tone controller commands (Address %10)|
| |Master Volume 10 011 DDDDDD|
| |Left Volume 10 101 .DDDDD|
| |Right Volume 10 100 .DDDDD|
| |Treble 10 010 ..DDDD|
| |Bass 10 001 ..DDDD|
| |Mixer 10 000 ....DD|
| +-----------------------------------------------------+
| |Volume/tone controller values |
| |Master Volume : 0-40 (0 -80dB, 40=0dB) |
| |Left/Right Volume : 0-20 (0 80dB, 20=0dB) |
| |Treble/bass : 0-12 (0 -12dB, 12 +12dB) |
| |Mixer : 0-3 (0 -12dB, 1 mix PSG) |
| | (2 don't mix,3 reserved) |
| +-----------------------------------------------------+
| |Procedure: Set mask register to $7ff. Read data |
| |register and save original value.Write data register.|
| |Compare data register with original value, repeat |
| |until data register returns to original value to |
| |ensure data has been sent over the interface. |
| +-----------------------------------------------------+
| |Interrupts: Timer A can be set to interrupt at the |
| |end of a frame. Alternatively, the GPI7 (MFP mono |
| |detect) can be used to generate interrupts thereby |
| |freeing up Timer A. In this case, the active edge |
| |$FFFA03 must be set by or-ing the active edge of |
| |$FFFA03 with the contents of $FF8260: |
| |$FF8260 - 2 (mono) or.b #$80 with edge |
| |$FF8260 - 0,1 (colour) and.b #$7F with edge |
| |This will generate an interrupt at the START of a |
| |frame, instead of at the end as with Timer A. To |
| |generate an interrupt at the END of a frame, simply |
| |reverse the edge values. |
+-----+-----------------------------------------------------+----------
- Falcon030 DMA/DSP Controllers ###########
+-----+-----------------------------------------------------+----------
$FF8930|word |Crossbar Source Controller |R/W (F030)
| +-----------------------------------------------------+
| |Source: A/D Convertor BIT 15 14 13 12|
| |1 - Connect, 0 - disconnect ---------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock (Don't use) -----------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: External Input BIT 11 10 9 8|
| |0 - DSP IN, 1 - All others ----------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: DSP-XMIT BIT 7 6 5 4|
| |0 - Tristate and disconnect DSP -----------+ | | ||
| | (Only for external SSI use) | | | ||
| |1 - Connect DSP to multiplexer ------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: DMA-PLAYBACK BIT 3 2 1 0|
| |0 - Handshaking on, dest DSP-REC ----------+ | | ||
| |1 - Destination is not DSP-REC ------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
+-----+-----------------------------------------------------+----------
$FF8932|word |Crossbar Destination Controller |R/W (F030)
| +-----------------------------------------------------+
| |Destination: D/A Convertor BIT 15 14 13 12|
| |1 - Connect, 0 - Disconnect ---------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: External Output BIT 11 10 9 8|
| |0 - DSP out, 1 - All others ---------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: DSP-RECORD BIT 7 6 5 4|
| |0 - Tristate and disconnect DSP -----------+ | | ||
| | (Only for external SSI use) | | | ||
| |1 - Connect DSP to multiplexer ------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: DMA-RECORD BIT 3 2 1 0|
| |0 - Handshaking on, src DSP-XMIT ----------+ | | ||
| |1 - Source is not DSP-XMIT ----------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
+-----+-----------------------------------------------------+----------
$FF8934|byte |Frequency Divider External Clock BIT 3 2 1 0|R/W (F030)
| |0000 - STe-Compatible mode |
| |0001 - 1111 Divide by 256 and then number |
+-----+-----------------------------------------------------+----------
$FF8935|byte |Frequency Divider Internal Sync BIT 3 2 1 0|R/W (F030)
| |0000 - STe-Compatible mode 1000 - 10927Hz* |
| |0001 - 49170Hz 1001 - 9834Hz |
| |0010 - 32780Hz 1010 - 8940Hz* |
| |0011 - 24585Hz 1011 - 8195Hz |
| |0100 - 19668Hz 1100 - 7565Hz* |
| |0101 - 16390Hz 1101 - 7024Hz* |
| |0110 - 14049Hz* 1110 - 6556Hz* |
| |0111 - 12292Hz 1111 - 6146Hz* |
| | * - Invalid for CODEC |
+-----+-----------------------------------------------------+----------
$FF8936|byte |Record Tracks Select BIT 1 0|R/W (F030)
| |00 - Record 1 Track ------------------------------+-+|
| |01 - Record 2 Tracks -----------------------------+-+|
| |10 - Record 3 Tracks -----------------------------+-+|
| |11 - Record 4 Tracks -----------------------------+-'|
+-----+-----------------------------------------------------+----------
$FF8937|byte |CODEC Input Source from 16bit adder BIT 1 0|R/W (F030)
| |Source: Multiplexer ------------------------------' ||
| |Source: A/D Convertor ------------------------------'|
+-----+-----------------------------------------------------+----------
$FF8938|byte |CODEC ADC-Input for L+R Channel BIT 1 0|R/W (F030)
| |0 - Microphone, 1 - Soundchip L R|
+-----+-----------------------------------------------------+----------
$FF8939|byte |Channel amplification BIT LLLL RRRR|R/W (F030)
| | Amplification is in +1.5dB steps |
+-----+-----------------------------------------------------+----------
$FF893A|word |Channel attenuation BIT LLLL RRRR|R/W (F030)
| | Attenuation is in -1.5dB steps |
+-----+-----------------------------------------------------+----------
$FF893C|byte |CODEC-Status BIT 1 0|R/W (F030)
| |Left Channel Overflow ----------------------------' ||
| |Right Channel Overflow -----------------------------'|
+-----+-----------------------------------------------------+----------
$FF8941|byte |GPx Data Direction BIT 2 1 0|R/W (F030)
| |0 - In, 1 - Out --------------------------------+-+-'|
| | For the GP0-GP2 pins on the DSP connector |
+-----+-----------------------------------------------------+----------
$FF8943|byte |GPx Data Port BIT 2 1 0|R/W (F030)
+-----+-----------------------------------------------------+----------
- TT Clock Chip (MC146818A @ 32.768 khz) ###########
+-----+-----------------------------------------------------+----------
$FF8961|byte |Register select |W (TT)
| |0 - Current Second |
| |1 - Second for alarm |
| |2 - Current Minute |
| |3 - Minute for alarm |
| |4 - Current Hour |
| |5 - Hour for alarm |
| |6 - Day of week (1=Sunday, 2=Monday, 3=...) |
| |7 - Day of Month |
| |8 - Month |
| |9 - Year (example : '93' for this year) |
| |A BIT 7|
| | If set, update time in progress ----------------'|
| | don't read time & date registers |
| |B BIT 7 6 5 4 3 2 1 0|
| |1 = Write Protect time & date --------' | | | | ||
| |1 = Enable alarm interrupt ---------------' | | | ||
| |1 = Interrupt after time updated -----------' | | ||
| |1 = Format Binary, 0 = Format BCD --------------' | ||
| |1 = 24hr format, 0 = 12hr format -----------------' ||
| |1 = Summer hours, 0 = Winter hours -----------------'|
| |C BIT 6 5 4|
| | ??? -------------------------------------------' | ||
| |1 = alarm is ringing -----------------------------' ||
| |1 = date is updated --------------------------------'|
| |On interrupt, read this register to determine source.|
| |D BIT 7|
| |1 = Battery dead -----------------------------------'|
$FF8963|byte |Register data |R/W (TT)
+-----+-----------------------------------------------------+----------
- Blitter (Not present on TT!) ###########
+-----+-----------------------------------------------------+----------
$FF8A00|word |Halftone-RAM, Word 0 |R/W (Blit)
: | : | : : : : | : :
$FF8A1E|word |Halftone-RAM, Word 15 |R/W (Blit) $FF8A20|word |Source X Increment (signed,even)|R/W (Blit) $FF8A22|word |Source Y Increment (signed,even)|R/W (Blit) $FF8A24|long |Source Address Register (24 bit,even)|R/W (Blit) $FF8A28|word |Endmask 1 (First write of a line)|R/W (Blit) $FF8A2A|word |Endmask 2 (All other line writes)|R/W (Blit) $FF8A2C|word |Endmask 3 (Last write of a line)|R/W (Blit) $FF8A2E|word |Destination X Increment (signed,even)|R/W (Blit) $FF8A30|word |Destination Y Increment (signed,even)|R/W (Blit) $FF8A32|long |Destination Address Register (24 bit,even)|R/W (Blit) $FF8A36|word |Words per Line in Bit-Block (0=65536)|R/W (Blit) $FF8A38|word |Lines per Bit-Block (0=65536)|R/W (Blit) $FF8A3A|byte |Halftone Operation Register BIT 1 0|R/W (Blit)
| |00 - All ones ------------------------------------+-+|
| |01 - Halftone ------------------------------------+-+|
| |10 - Source --------------------------------------+-+|
| |11 - Source AND Halftone -------------------------+-'|
$FF8A3B|byte |Logical Operation Register BIT 3 2 1 0|R/W (Blit)
| |0000 All zeros -------------------------------+-+-+-+|
| |0001 Source AND destination ------------------+-+-+-+|
| |0010 Source AND NOT destination --------------+-+-+-+|
| |0011 Source ----------------------------------+-+-+-+|
| |0100 NOT source AND destination --------------+-+-+-+|
| |0101 Destination -----------------------------+-+-+-+|
| |0110 Source XOR destination ------------------+-+-+-+|
| |0111 Source OR destination -------------------+-+-+-+|
| |1000 NOT source AND NOT destination ----------+-+-+-+|
| |1001 NOT source XOR destination --------------+-+-+-+|
| |1010 NOT destination -------------------------+-+-+-+|
| |1011 Source OR NOT destination ---------------+-+-+-+|
| |1100 NOT source ------------------------------+-+-+-+|
| |1101 NOT source OR destination ---------------+-+-+-+|
| |1110 NOT source OR NOT destination -----------+-+-+-+|
| |1111 All ones --------------------------------+-+-+-'|
$FF8A3C|byte |Line Number Register BIT 7 6 5 . 3 2 1 0|R/W (Blit)
| |BUSY ---------------------------------' | | | | | ||
| |0 - Share bus, 1 - Hog bus -------------' | | | | ||
| |SMUDGE mode ------------------------------' | | | ||
| |Halftone line number -------------------------+-+-+-'|
$FF8A3D|byte |SKEW Register BIT 7 6 . . 3 2 1 0|R/W (Blit)
| |Force eXtra Source Read --------------' | | | | ||
| |No Final Source Read -------------------' | | | ||
| |Source skew ----------------------------------+-+-+-'|
+-----+-----------------------------------------------------+----------
- SCC-DMA (TT Only!) ###########
+-----+-----------------------------------------------------+----------
$FF8C01|byte |DMA Address Pointer (Highest Byte) |R/W (TT) $FF8C03|byte |DMA Address Pointer (High Byte) |R/W (TT) $FF8C05|byte |DMA Address Pointer (Low Byte) |R/W (TT) $FF8C07|byte |DMA Address Pointer (Lowest Byte) |R/W (TT) $FF8C09|byte |DMA Byte Count (Highest-Byte) |R/W (TT) $FF8C0B|byte |DMA Byte Count (High-Byte) |R/W (TT) $FF8C0D|byte |DMA Byte Count (Low-Byte) |R/W (TT) $FF8C0F|byte |DMA Byte Count (Lowest-Byte) |R/W (TT) $FF8C10|word |Residue Data Register (High-Word) |R (TT) $FF8C12|word |Residue Data register (Low-Word) |R (TT) $FF8C15|byte |Control register BIT 7 6 . . . . 1 0|R/W (TT)
| |Bus error ----------------------------' | | ||
| |Byte count zero ------------------------' | ||
| |Enable -------------------------------------------' ||
| |DMA Direction (1 - out to port) --------------------'|
+-----+-----------------------------------------------------+----------
- Zilog 8530 SCC (MSTe/TT/F030) ###########
+-----+-----------------------------------------------------+----------
$FF8C81|byte |Channel A - Control Register |R/W (SCC) $FF8C83|byte |Channel A - Data Register |R/W (SCC) $FF8C85|byte |Channel B - Control Register |R/W (SCC) $FF8C87|byte |Channel B - Data Register |R/W (SCC)
+-----+-----------------------------------------------------+----------
- VME Bus System Control Unit (MSTe/TT) ###########
+-----+-----------------------------------------------------+----------
$FF8E01|byte |VME sys_mask BIT 7 6 5 4 . 2 1 .|R/W (VME) $FF8E03|byte |VME sys_stat BIT 7 6 5 4 . 2 1 .|R (VME)
| |_SYSFAIL in VMEBUS -------------------' | | | | | |program
| |MFP ------------------------------------' | | | | |autovec
| |SCC --------------------------------------' | | | |autovec
| |VSYNC --------------------------------------' | | |program
| |HSYNC ------------------------------------------' | |program
| |System software INT ------------------------------' |program
| +-----------------------------------------------------+
| |Reading sys_mask resets pending int-bits in sys_stat,|
| |so read sys_stat first. |
+-----+-----------------------------------------------------+----------
$FF8E05|byte |VME sys_int BIT 0|R/W (VME)
| |Setting bit 0 to 1 forces an INT of level 1. INT must|Vector $64
| |be enabled in sys_mask to use it. |
+-----+-----------------------------------------------------+----------
$FF8E0D|byte |VME vme_mask BIT 7 6 5 4 3 2 1 .|R/W (VME) $FF8E0F|byte |VME vme_stat BIT 7 6 5 4 3 2 1 .|R (VME)
| |_IRQ7 from VMEBUS --------------------' | | | | | | |program
| |_IRQ6 from VMEBUS/MFP ------------------' | | | | | |program
| |_IRQ5 from VMEBUS/SCC --------------------' | | | | |program
| |_IRQ4 from VMEBUS --------------------------' | | | |program
| |_IRQ3 from VMEBUS/soft -----------------------' | | |prog/autov
| |_IRQ2 from VMEBUS ------------------------------' | |program
| |_IRQ1 from VMEBUS --------------------------------' |program
| +-----------------------------------------------------+
| |MFP-int and SCC-int are hardwired to the VME-BUS-ints|
| |(or'ed). Reading vme_mask resets pending int-bits in |
| |vme_stat, so read vme_stat first. |
+-----+-----------------------------------------------------+----------
$FF8E07|byte |VME vme_int BIT 0|R/W (TT)
| |Setting bit 0 to 1 forces an INT of level 3. INT must|Vector $6C
| |be enabled in vme_mask to use it. |
+-----+-----------------------------------------------------+----------
$FF8E09|byte |General purpose register - does nothing |R/W (TT) $FF8E0B|byte |General purpose register - does nothing |R/W (TT)
+-----+-----------------------------------------------------+----------
- Mega STe Cache/Processor Control ###########
+-----+-----------------------------------------------------+----------
$FF8E21|byte |Mega STe Cache/Processor Control BIT 15-1 0|R/W (MSTe)
| |Cache enable lines (set all to 1 to enable) -----' ||
| |CPU Speed (0 - 8mhz, 1 - 16mhz) --------------------'|
+-----+-----------------------------------------------------+----------
- STe/F030 Extended Joystick/Lightpen Ports ###########
+-----+-----------------------------------------------------+----------
$FF9200|word |Fire buttons 1-4 Bit 3 2 1 0|R (Ext)
| |Pause/F0 -------------------------------------' | | ||
| |F1 ---------------------------------------------' | ||
| |F2 -----------------------------------------------' ||
| |Option/F3 ------------------------------------------'|
$FF9202|word |Read Mask (0 - pin read) |W (Ext) $FF9202|word |Joystick Inputs BIT 7 6 5 4 3 2 1 0|R (Ext)
| |Controller 1 pin 4 -------------------' | | | | | | ||
| |Controller 1 pin 3 ---------------------' | | | | | ||
| |Controller 1 pin 2 -----------------------' | | | | ||
| |Controller 1 pin 1 -------------------------' | | | ||
| |Controller 0 pin 4 ---------------------------' | | ||
| |Controller 0 pin 3/Paddle 1 Trigger ------------' | ||
| |Controller 0 pin 2/Paddle 0 Trigger --------------' ||
| |Controller 0 pin 1 ---------------------------------'|
| | BIT 15 14 13 12 11 10 9 8|
| |Controller 1 pin 14 ------------' | | | | | | ||
| |Controller 1 pin 13 ----------------' | | | | | ||
| |Controller 1 pin 12 -------------------' | | | | ||
| |Controller 1 pin 11 ----------------------' | | | ||
| |Controller 0 pin 14 -------------------------' | | ||
| |Controller 0 pin 13 ----------------------------' | ||
| |Controller 0 pin 12 ------------------------------' ||
| |Controller 0 pin 11 --------------------------------'|
$FF9210|word |X Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9212|word |Y Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9214|word |X Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9216|word |Y Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9220|word |Lightpen X-Position BIT 9 8 7 6 5 4 3 2 1 0|R (Ext) $FF9222|word |Lightpen Y-Position BIT 9 8 7 6 5 4 3 2 1 0|R (Ext)
+-----+-----------------------------------------------------+----------
- Falcon VIDEL Palette Registers ###########
+-----+-----------------------------------------------------+----------
| | BIT 33222222 22221111 11111198 76543210|
| | 10987654 32109876 543210 |
| | RRRRRr.. GGGGGg.. ........ BBBBBb..|
$FF9800|long |Palette Register 0 Lowercase = LSB|R/W (F030)
: | : | : : : | : :
$FF98FC|long |Palette Register 255 |R/W (F030)
+-----+-----------------------------------------------------+----------
- Falcon DSP Host Interface ###########
+-----+-----------------------------------------------------+----------
$FFA200|byte |Interrupt Ctrl Register BIT 7 6 5 4 3 . 1 0|R/W (F030) X:$FFE9| |INIT bit -----------------------------' | | | | | ||
| |00 - Interupt mode (DMA off) -----------+-+ | | | ||
| |01 - 24-bit DMA mode -------------------+-+ | | | ||
| |10 - 16-bit DMA mode -------------------+-+ | | | ||
| |11 - 8-bit DMA mode --------------------+-' | | | ||
| |Host Flag 1 --------------------------------' | | ||
| |Host Flag 0 ----------------------------------' | ||
| | Host mode Data transfers: | ||
| | Interrupt mode | ||
| |00 - No interrupts (Polling) ---------------------+-+|
| |01 - RXDF Request (Interrupt) --------------------+-+|
| |10 - TXDE Request (Interrupt) --------------------+-+|
| |11 - RXDF and TXDE Request (Interrupts) ----------+-+|
| | DMA Mode | ||
| |00 - No DMA --------------------------------------+-+|
| |01 - DSP to Host Request (RX) --------------------+-+|
| |10 - Host to DSP Request (TX) --------------------+-+|
| |11 - Undefined (Illegal) -------------------------+-'|
$FFA201|byte |Command Vector Register BIT 7 . . 4 3 2 1 0|R/W (F030) X:$FFE9| |Host Command Bit (Handshake)----------' | | | | ||
| |Host Vector (0-31) -------------------------+-+-+-+-'|
$FFA202|byte |Interrupt Status Reg BIT 7 6 . 4 3 2 1 0|R (F030) X:$FFE8| |ISR Host Request ---------------------' | | | | | ||
| |ISR DMA Status -------------------------' | | | | ||
| |Host Flag 3 --------------------------------' | | | ||
| |Host Flag 2 ----------------------------------' | | ||
| |ISR Transmitter Ready (TRDY) -------------------' | ||
| |ISR Transmit Data Register Empty (TXDE) ----------' ||
| |ISR Receive Data Register Full (RXDF) --------------'|
$FFA203|byte |Interrupt Vector Register |R/W (F030) $FFA204|byte |Unused | (F030) $FFA205|byte |DSP-Word High |R/W (F030) X:$FFEB| | | $FFA206|byte |DSP-Word Mid |R/W (F030) X:$FFEB| | | $FFA207|byte |DSP-Word Low |R/W (F030) X:$FFEB| | |
+-----+-----------------------------------------------------+----------
- MFP 68901 - Multi Function Peripheral Chip ###########
+-----+-----------------------------------------------------+----------
| | MFP Master Clock is 2,457,600 cycles/second |
+-----+-----------------------------------------------------+----------
$FFFA01|byte |Parallel Port Data Register |R/W
+-----+-----------------------------------------------------+----------
$FFFA03|byte |Active Edge Register BIT 7 6 5 4 . 2 1 0|R/W
| |Monochrome monitor detect ------------' | | | | | | ||
| |RS-232 Ring indicator ------------------' | | | | | ||
| |FDC/HDC interrupt ------------------------' | | | | ||
| |Keyboard/MIDI interrupt --------------------' | | | ||
| |Reserved -------------------------------------' | | ||
| |RS-232 CTS (input) -----------------------------' | ||
| |RS-232 DCD (input) -------------------------------' ||
| |Centronics busy ------------------------------------'|
| +-----------------------------------------------------+
| | When port bits are used for input only: |
| |0 - Interrupt on pin high-low conversion |
| |1 - Interrupt on pin low-high conversion |
+-----+-----------------------------------------------------+----------
$FFFA05|byte |Data Direction BIT 7 6 5 4 3 2 1 0|R/W
| |0 - In, 1 - Out ----------------------+-+-+-+-+-+-+-'|
+-----+-----------------------------------------------------+----------
$FFFA07|byte |Interrupt Enable A BIT 7 6 5 4 3 2 1 0|R/W $FFFA0B|byte |Interrupt Pending A BIT 7 6 5 4 3 2 1 0|R/W $FFFA0F|byte |Interrupt In-service A BIT 7 6 5 4 3 2 1 0|R/W $FFFA13|byte |Interrupt Mask A BIT 7 6 5 4 3 2 1 0|R/W
| |MFP Address | | | | | | | ||
| |$13C GPI7-Monochrome Detect ----------' | | | | | | ||
| |$138 RS-232 Ring Detector ------------' | | | | | ||
| |$134 (STe sound) Timer A --------------' | | | | ||
| |$130 Receive buffer full ----------------' | | | ||
| |$12C Receive error ------------------' | | ||
| |$128 Send buffer empty --------------------' | ||
| |$124 Send error ----------------------' ||
| |$120 (HBL) Timer B ------------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
+-----+-----------------------------------------------------+----------
$FFFA09|byte |Interrupt Enable B BIT 7 6 5 4 3 2 1 0|R/W $FFFA0D|byte |Interrupt Pending B BIT 7 6 5 4 3 2 1 0|R/W $FFFA11|byte |Interrupt In-service B BIT 7 6 5 4 3 2 1 0|R/W $FFFA15|byte |Interrupt Mask B BIT 7 6 5 4 3 2 1 0|R/W
| |MFP Address | | | | | | | ||
| |$11C FDC/HDC ----------' | | | | | | ||
| |$118 Keyboard/MIDI ------------' | | | | | ||
| |$114 (200hz clock) Timer C --------------' | | | | ||
| |$110 (USART timer) Timer D ----------------' | | | ||
| |$10C Blitter done ------------------' | | ||
| |$108 RS-232 CTS - input --------------------' | ||
| |$104 RS-232 DCD - input ----------------------' ||
| |$100 Centronics Busy ------------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
+-----+-----------------------------------------------------+----------
$FFFA17|byte |Vector Register BIT 7 6 5 4 3 . . .|R/W
| |Vector Base Offset -------------------+-+-+-' | |
| |1 - *Software End-interrupt mode -------------+ |
| |0 - Automatic End-interrupt mode -------------' |
| |* - Default operating mode |
+-----+-----------------------------------------------------+----------
$FFFA19|byte |Timer A Control BIT 4 3 2 1 0|R/W $FFFA1B|byte |Timer B Control BIT 4 3 2 1 0|R/W
| |Reset (force output low) -------------------' | | | ||
| +----------------------------------------------+-+-+-++
| |0000 - Timer stop, no function executed |
| |0001 - Delay mode, divide by 4 |
| |0010 - : : 10 |
| |0011 - : : 16 |
| |0100 - : : 50 |
| |0101 - : : 64 |
| |0110 - : : 100 |
| |0111 - Delay mode, divide by 200 |
| |1000 - Event count mode |
| |1xxx - Pulse extension mode, divide as above |
| +-----------------------------------------------------+
$FFFA1F|byte |Timer A Data |R/W $FFFA21|byte |Timer B Data |R/W
+-----+-----------------------------------------------------+----------
$FFFA1D|byte |Timer C & D Control BIT 6 5 4 . 2 1 0|R/W
| | Timer Timer|
| | C D |
| +-----------------------------------------------------+
| |000 - Timer stop |
| |001 - Delay mode, divide by 4 |
| |010 - : : 10 |
| |011 - : : 16 |
| |100 - : : 50 |
| |101 - : : 64 |
| |110 - : : 100 |
| |111 - Delay mode, divide by 200 |
| +-----------------------------------------------------+
$FFFA23|byte |Timer C Data |R/W $FFFA25|byte |Timer D Data |R/W
+-----+-----------------------------------------------------+----------
$FFFA27|byte |Sync Character |R/W $FFFA29|byte |USART Control BIT 7 6 5 4 3 2 1 .|R/W
| |Clock divide (1 - div by 16) ---------' | | | | | | ||
| |Word Length 00 - 8 bits ----------------+-+ | | | | ||
| | 01 - 7 bits ----------------+-+ | | | | ||
| | 10 - 6 bits ----------------+-+ | | | | ||
| | 11 - 5 bits ----------------+-' | | | | ||
| |Bits Stop Start Format | | | | ||
| |00 0 0 Synchronous ----------------+-+ | | ||
| |01 1 1 Asynchronous ---------------+-+ | | ||
| |10 1 1.5 Asynchronous ---------------+-+ | | ||
| |11 1 2 Asynchronous ---------------+-' | | ||
| |Parity (0 - ignore parity bit) -----------------' | ||
| |Parity (0 - odd parity,1 - even) -----------------' ||
| |Unused ---------------------------------------------'|
$FFFA2B|byte |Receiver Status BIT 7 6 5 4 3 2 1 0|R/W
| |Buffer full --------------------------' | | | | | | ||
| |Overrun error --------------------------' | | | | | ||
| |Parity error -----------------------------' | | | | ||
| |Frame error --------------------------------' | | | ||
| |Found - Search/Break detected ----------------' | | ||
| |Match/Character in progress --------------------' | ||
| |Synchronous strip enable -------------------------' ||
| |Receiver enable bit --------------------------------'|
$FFFA2D|byte |Transmitter Status BIT 7 6 5 4 3 2 1 0|R/W
| |Buffer empty -------------------------' | | | | | | ||
| |Underrun error -------------------------' | | | | | ||
| |Auto turnaround --------------------------' | | | | ||
| |End of transmission ------------------------' | | | ||
| |Break ----------------------------------------' | | ||
| |High bit ---------------------------------------' | ||
| |Low bit ------------------------------------------' ||
| |Transmitter enable ---------------------------------'|
$FFFA2F|byte |USART data |R/W
+-----+-----------------------------------------------------+----------
- Floating Point Coprocessor (CIR Interface in MSTe) ###########
+-----+-----------------------------------------------------+----------
$FFFA40|word |FP_Stat Response-Register |??? (MSTe) $FFFA42|word |FP_Ctl Control-Register |??? (MSTe) $FFFA44|word |FP_Save Save-Register |??? (MSTe) $FFFA46|word |FP_Restor Restore-Register |??? (MSTe) $FFFA48|word | |??? (MSTe) $FFFA4A|word |FP_Cmd Command-Register |??? (MSTe) $FFFA4E|word |FP_Ccr Condition-Code-Register |??? (MSTe) $FFFA50|long |FP_Op Operand-Register |??? (MSTe) $FFFA54|word |FP_Selct Register Select |??? (MSTe) $FFFA58|long |FP_Iadr Instruction Address |??? (MSTe) $FFFA5C|long | Operand Address |??? (MSTe)
+-----+-----------------------------------------------------+----------
- MFP 68901 #2 (MFP2) - TT Only ###########
+-----+-----------------------------------------------------+----------
$FFFA81|byte |Parallel Port Data Register |R/W (TT)
+-----+-----------------------------------------------------+----------
$FFFA83|byte |Active Edge Register BIT 7 6 5 4 3 2 1 0|R/W (TT)
| +-----------------------------------------------------+
| | When port bits are used for input only: |
| |0 - Interrupt on pin high-low conversion |
| |1 - Interrupt on pin low-high conversion |
+-----+-----------------------------------------------------+----------
$FFFA85|byte |Data Direction BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |0 - In, 1 - Out ----------------------+-+-+-+-+-+-+-'|
+-----+-----------------------------------------------------+----------
$FFFA87|byte |Interrupt Enable A BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA8B|byte |Interrupt Pending A BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA8F|byte |Interrupt In-service A BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA93|byte |Interrupt Mask A BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |MFP Address | | | | | | | ||
| |$17C TT-SCSI NCR5380 ---------' | | | | | | ||
| |$178 RTC (MC146818A) -----------' | | | | | ||
| |$174 Timer A -------------' | | | | ||
| |$170 Receive buffer full ---------------' | | | ||
| |$16C Receive error -----------------' | | ||
| |$168 Send buffer empty -------------------' | ||
| |$164 Send error ---------------------' ||
| |$160 Timer B -----------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
+-----+-----------------------------------------------------+----------
$FFFA89|byte |Interrupt Enable B BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA8D|byte |Interrupt Pending B BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA91|byte |Interrupt In-service B BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA95|byte |Interrupt Mask B BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |MFP Address | | | | | | | ||
| |$15C SCSI DMA Controller ---------' | | | | | | ||
| |$158 (Reserved) GPIP 4 -----------' | | | | | ||
| |$154 Timer C -------------' | | | | ||
| |$150 Timer D ---------------' | | | ||
| |$14C SCC B Ring Indicator -----------------' | | ||
| |$148 SCC DMA Controller -------------------' | ||
| |$144 General Purpose Input 1 ---------------------' ||
| |$140 General Purpose Input 0 -----------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
+-----+-----------------------------------------------------+----------
$FFFA97|byte |Vector Register BIT 7 6 5 4 3 . . .|R/W (TT)
| |Vector Base Offset -------------------+-+-+-' | |
| |1 - *Software End-interrupt mode -------------+ |
| |0 - Automatic End-interrupt mode -------------' |
| |* - Default operating mode |
+-----+-----------------------------------------------------+----------
$FFFA99|byte |Timer A Control BIT 4 3 2 1 0|R/W (TT) $FFFA9B|byte |Timer B Control BIT 4 3 2 1 0|R/W (TT)
| |Reset (force output low) -------------------' | | | ||
| +----------------------------------------------+-+-+-++
| |0000 - Timer stop, no function executed |
| |0001 - Delay mode, divide by 4 |
| |0010 - : : 10 |
| |0011 - : : 16 |
| |0100 - : : 50 |
| |0101 - : : 64 |
| |0110 - : : 100 |
| |0111 - Delay mode, divide by 200 |
| |1000 - Event count mode |
| |1xxx - Pulse extension mode, divide as above |
| +-----------------------------------------------------+
$FFFA9F|byte |Timer A Data |R/W (TT) $FFFAA1|byte |Timer B Data |R/W (TT)
+-----+-----------------------------------------------------+----------
$FFFA9D|byte |Timer C & D Control BIT 6 5 4 . 2 1 0|R/W (TT)
| | Timer Timer|
| | C D |
| +-----------------------------------------------------+
| |000 - Timer stop |
| |001 - Delay mode, divide by 4 |
| |010 - : : 10 |
| |011 - : : 16 |
| |100 - : : 50 |
| |101 - : : 64 |
| |110 - : : 100 |
| |111 - Delay mode, divide by 200 |
| +-----------------------------------------------------+
$FFFAA3|byte |Timer C Data |R/W (TT) $FFFAA5|byte |Timer D Data |R/W (TT)
+-----+-----------------------------------------------------+----------
$FFFAA7|byte |Sync Character |R/W (TT) $FFFAA9|byte |USART Control BIT 7 6 5 4 3 2 1 .|R/W (TT)
| |Clock divide (1 - div by 16) ---------' | | | | | | ||
| |Word Length 00 - 8 bits ----------------+-+ | | | | ||
| | 01 - 7 bits ----------------+-+ | | | | ||
| | 10 - 6 bits ----------------+-+ | | | | ||
| | 11 - 5 bits ----------------+-' | | | | ||
| |Bits Stop Start Format | | | | ||
| |00 0 0 Synchronous ----------------+-+ | | ||
| |01 1 1 Asynchronous ---------------+-+ | | ||
| |10 1 1.5 Asynchronous ---------------+-+ | | ||
| |11 1 2 Asynchronous ---------------+-' | | ||
| |Parity (0 - ignore parity bit) -----------------' | ||
| |Parity (0 - odd parity,1 - even) -----------------' ||
| |Unused ---------------------------------------------'|
$FFFAAB|byte |Receiver Status BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |Buffer full --------------------------' | | | | | | ||
| |Overrun error --------------------------' | | | | | ||
| |Parity error -----------------------------' | | | | ||
| |Frame error --------------------------------' | | | ||
| |Found - Search/Break detected ----------------' | | ||
| |Match/Character in progress --------------------' | ||
| |Synchronous strip enable -------------------------' ||
| |Receiver enable bit --------------------------------'|
$FFFAAD|byte |Transmitter Status BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |Buffer empty -------------------------' | | | | | | ||
| |Underrun error -------------------------' | | | | | ||
| |Auto turnaround --------------------------' | | | | ||
| |End of transmission ------------------------' | | | ||
| |Break ----------------------------------------' | | ||
| |High bit ---------------------------------------' | ||
| |Low bit ------------------------------------------' ||
| |Transmitter enable ---------------------------------'|
$FFFAAF|byte |USART data |R/W (TT)
+-----+-----------------------------------------------------+----------
- 6850 ACIA I/O Chips ###########
+-----+-----------------------------------------------------+----------
$FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|W
| |Rx Int enable (1 - enable) -----------' | | | | | | ||
| |Tx Interrupts | | | | | | ||
| |00 - RTS low, Tx int disable -----------+-+ | | | | ||
| |01 - RTS low, Tx int enable ------------+-+ | | | | ||
| |10 - RTS high, Tx int disable ----------+-+ | | | | ||
| |11 - RTS low, Tx int disable, | | | | | | ||
| | Tx a break onto data out ----------+-' | | | | ||
| |Settings | | | | ||
| |000 - 7 bit, even, 2 stop bit --------------+-+-+ | ||
| |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | ||
| |010 - 7 bit, even, 1 stop bit --------------+-+-+ | ||
| |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | ||
| |100 - 8 bit, 2 stop bit --------------------+-+-+ | ||
| |101 - 8 bit, 1 stop bit --------------------+-+-+ | ||
| |110 - 8 bit, even, 1 stop bit --------------+-+-+ | ||
| |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | ||
| |Clock divide | ||
| |00 - Normal --------------------------------------+-+|
| |01 - Div by 16 -----------------------------------+-+|
| |10 - Div by 64 -----------------------------------+-+|
| |11 - Master reset --------------------------------+-'|
$FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|R
| |Interrupt request --------------------' | | | | | | ||
| |Parity error ---------------------------' | | | | | ||
| |Rx overrun -------------------------------' | | | | ||
| |Framing error ------------------------------' | | | ||
| |CTS ------------------------------------------' | | ||
| |DCD --------------------------------------------' | ||
| |Tx data register empty ---------------------------' ||
| |Rx data register full ------------------------------'|
$FFFC02|byte |Keyboard ACIA data |R/W $FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|W
| |Rx Int enable (1 - enable) -----------' | | | | | | ||
| |Tx Interrupts | | | | | | ||
| |00 - RTS low, Tx int disable -----------+-+ | | | | ||
| |01 - RTS low, Tx int enable ------------+-+ | | | | ||
| |10 - RTS high, Tx int disable ----------+-+ | | | | ||
| |11 - RTS low, Tx int disable, | | | | | | ||
| | Tx a break onto data out ----------+-' | | | | ||
| |Settings | | | | ||
| |000 - 7 bit, even, 2 stop bit --------------+-+-+ | ||
| |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | ||
| |010 - 7 bit, even, 1 stop bit --------------+-+-+ | ||
| |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | ||
| |100 - 8 bit, 2 stop bit --------------------+-+-+ | ||
| |101 - 8 bit, 1 stop bit --------------------+-+-+ | ||
| |110 - 8 bit, even, 1 stop bit --------------+-+-+ | ||
| |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | ||
| |Clock divide | ||
| |00 - Normal --------------------------------------+-+|
| |01 - Div by 16 -----------------------------------+-+|
| |10 - Div by 64 -----------------------------------+-+|
| |11 - Master reset --------------------------------+-'|
$FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|R
| |Interrupt request --------------------' | | | | | | ||
| |Parity error ---------------------------' | | | | | ||
| |Rx overrun -------------------------------' | | | | ||
| |Framing error ------------------------------' | | | ||
| |CTS ------------------------------------------' | | ||
| |DCD --------------------------------------------' | ||
| |Tx data register empty ---------------------------' ||
| |Rx data register full ------------------------------'|
$FFFC06|byte |MIDI ACIA data |R/W
+-----+-----------------------------------------------------+----------
- Realtime Clock ###########
+-----+-----------------------------------------------------+----------
$FFFC21|byte |S_Units |??? $FFFC23|byte |S_Tens |??? $FFFC25|byte |M_Units |??? $FFFC27|byte |M_Tens |??? $FFFC29|byte |H_Units |??? $FFFC2B|byte |H_Tens |??? $FFFC2D|byte |Weekday |??? $FFFC2F|byte |Day_Units |??? $FFFC31|byte |Day_Tens |??? $FFFC33|byte |Mon_Units |??? $FFFC35|byte |Mon_Tens |??? $FFFC37|byte |Yr_Units |??? $FFFC39|byte |Yr_Tens |??? $FFFC3B|byte |Cl_Mod |??? $FFFC3D|byte |Cl_Test |??? $FFFC3F|byte |Cl_Reset |???
+-----+-----------------------------------------------------+----------
- ROM ###########
+-----+-----------------------------------------------------+----------
$FA0000| | |
: | |128K ROM expansion cartridge port |R
$FBFFFF| | |
+-----+-----------------------------------------------------+----------
$FC0000| | |
: | |192K System ROM |R
$FEFFFF| | |
+-----+-----------------------------------------------------+----------
Atari 32 bit Memory Map
Addresses Description
+----------------------------------------------------------
$00000000-$00DFFFFF|ST RAM $00E00000-$00EFFFFF|512k TOS ROMs $00F00000-$00F9FFFF|Reserved I/O Space $00FA0000-$00FBFFFF|128k ROM cartridge expansion port $00FC0000-$00FEFFFF|192k System ROM $00FF0000-$00FF7FFF|Reserved I/O Space $00FF8000-$00FFFFFF|ST/TT I/O $01000000-$013FFFFF|TT Fast Ram $01400000-$FDFFFFFF|Reserved $FE000000-$FEFFFFFF|VME A24/D16 $FEFF0000-$FEFFFFFF|VME A16/D16 $FF000000-$FFFFFFFF|ST 24 bit compatible shadow $FFD000xx-$FFD000xx|Set FastRAM refresh rate and generate a bus error
+----------------------------------------------------------
Cookie Jar
Atari "Official" Cookies
Cookie Description
+----------------------------------------------------------------------
_CPU | CPU Type Bit 7 6 5 4 3 2 1 0
| Processor type is represented in decimal in the lowest byte.
| (0 - 68000, 40 - 68040)
+----------------------------------------------------------------------
_VDO | Video Type BIT 17 16
| Shifter Type | |
| 00 - ST ---------------------------------------------------------+--+
| 01 - STe --------------------------------------------------------+--+
| 10 - TT ---------------------------------------------------------+--+
| 11 - Falcon030 --------------------------------------------------+--'
+----------------------------------------------------------------------
_FDC | Floppy Drive Controller BIT 25 24 . 23-0
| Floppy Format | | |
| 00 - DD (Normal floppy interface) ------------------------+--+ |
| 01 - HD (1.44 MB with 3.5") ------------------------------+--+ |
| 10 - ED (2.88 MB with 3.5") ------------------------------+--' |
| Controller ID |
| 0 - No information available |
| 'ATC' - Fully compatible interface built in a way that -------------+
| behaves like part of the system. |
| 'DP1' - "DreamPark Development", all ID's beginning with -----------'
| "DP" are reserved for Dreampark.
+----------------------------------------------------------------------
_FLK | File Locking
| If present, GEMDOS supports file locking. Value represents version
| number of the expansion.
+----------------------------------------------------------------------
_NET | Network Type
| If present, there is GEMDOS network support. Points to 2 longs:
| The first is the ID of the producer, and the second is the version
| number.
+----------------------------------------------------------------------
_SLM | SLM Driver
| Diablo-driver for the SLM laser printer. Value points to a
| non-documented structure.
+----------------------------------------------------------------------
_INF | .INF Patch
| When present, STEFIX (patch program for TOS 1.06) is active.
+----------------------------------------------------------------------
_SND | Sound Hardware BIT 5 4 3 2 1 0
| CodeC (??) -----------------------------------------------' | | | | |
| Connection Matrix ------------------------------------------' | | | |
| DSP56001 -----------------------------------------------------' | | |
| 16 Bit DMA Sound -----------------------------------------------' | |
| 8 Bit DMA Sound --------------------------------------------------' |
| YM2149 -------------------------------------------------------------'
+----------------------------------------------------------------------
_MCH | Machine Type BIT 17 16
| 00 - ST/Mega ST -------------------------------------------------+--+
| 01 - STe & Compatible Machines (See Below) ----------------------+--+
| 10 - TT ---------------------------------------------------------+--+
| 11 - Falcon030 --------------------------------------------------+--'
| STe & Compatible Machines BIT 5 4 3 2 1 0
| 00000 - STe ----------------------------------------------+-+-+-+-+-+
| 00001 - ST Book ------------------------------------------+-+-+-+-+-+
| 10000 - Mega STe -----------------------------------------+-+-+-+-+-'
+----------------------------------------------------------------------
_SWI | Configuration Switches
| State of configuration switches (MSTe/TT only)
+----------------------------------------------------------------------
_FRB | Fast Ram Buffer
| (TT specific) 64k buffer for ACSI DMA
| 0 - no buffers assigned Not 0 - address of FastRam buffer
+----------------------------------------------------------------------
_FPU | FPU Type
| Software FPU BIT 3 2 1 0
| 68040's internal FPU -----------------------------------------' | | |
| 01 - 6888x present ---------------------------------------------+-+ |
| 10 - 68881 for sure --------------------------------------------+-+ |
| 11 - 68882 for sure --------------------------------------------+-' |
| SFP004 present -----------------------------------------------------'
| Hardware FPU BIT 11 10 9 8
| 68040's internal FPU ----------------------------------------' | | |
| 01 - 6888x present ---------------------------------------------+-+ |
| 10 - 68881 for sure --------------------------------------------+-+ |
| 11 - 68882 for sure --------------------------------------------+-' |
| SFP004 present -----------------------------------------------------'
+----------------------------------------------------------------------
_OOL | PoolFix
| Value corresponds to PoolFix version
+----------------------------------------------------------------------
_AKP | Keyboard/Language Configuration
| Keyboard Configuration Bit 15-8
| 1 - German 5 - Italian -------------------------------------------+
| 2 - French 7 - Swiss French --------------------------------------+
| 4 - Spanish 8 - Swiss German --------------------------------------+
| All others - English -----------------------------------------------'
| Language Configuration BIT 7-0
| 1 - German 5 - Italian -------------------------------------------+
| 2 - French 7 - Swiss French --------------------------------------+
| 4 - Spanish 8 - Swiss German --------------------------------------+
| All others - English -----------------------------------------------'
+----------------------------------------------------------------------
_IDT | International Date/Time Format
| Time Format BIT 12
| 0 - AM/PM, 1 - 24 hours --------------------------------------------+
| Date Format BIT 9 8
| 00 - MMDDYY ------------------------------------------------------+-+
| 01 - DDMMYY ------------------------------------------------------+-+
| 10 - YYMMDD ------------------------------------------------------+-+
| 11 - YYDDMM ------------------------------------------------------+-'
| Separator for date BIT 7-0
| ASCII Value (i.e. "." or "/") --------------------------------------'
+----------------------------------------------------------------------
MiNT | MiNT
| Present if MiNT/MultiTOS is active. Value represents the version
| number of the MiNT kernel in hex (0x104 = 1.04)
+----------------------------------------------------------------------
